Filter By:
Cassettes/Freewheels
$89.95
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have.
Compatibility:
- Compatible with SRAM 10-speed cassettes listed on the GC tech page
- Compatible with all 10-speed chains
- Note that you may need a longer chain that you currently have on your bike
- Chain stretch should be less than .5 when installing a new GC
- Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older
- These older rear derailleurs do work with the GC40.
- Can be run in 2x configuration with a long cage rear derailleur
- These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
$79.95
- Extended range aluminum cog for those wanting 1x10 with a full range of gears
- Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs)
- Requires removal of the 17T or 15T cog and spacer from existing cassette
- Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs
- May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines
- Designed and manufactured in the USA from 7075-T6 aluminum alloy
Page 1 of 1