$9.79 - $14.99
White Lightning's Clean Streak cleans the grimiest, greasiest drivetrains with an easy to use, no mess spray. Clean Streak breaks down grease and road grime and dries in minutes with no residue. Use Clean Streak to prepare your drivetrain for the ultimate fresh coat of chain lube.
$10.99 - $12.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.
Tri-Flow Foaming Lubricant helps penetrate and protect bearings, chains and cables. - Foaming action helps cling to vertical or horizontal surfaces - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$7.58 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
• High gloss formula provides the ultimate shine on all surfaces: metal, carbon fiber, plastic, rubber and vinyl. • Polishes and protects in one easy step • Use on bicycles, fitness equipment, motorcycles, watercraft, ATVs and more. • Slick film helps prevent dirt build-up on frame and parts.
Keep your drivetrain quiet while protecting your components with Squirt Dry Lube. This long-lasting wax and water-based lubricant is low maintenance and easy to apply: no degreasing is needed, just squirt it on and ride. Squirt is 100% biodegradable and doesn't contain harmful solvents. Plus, it works in all-conditions, wet or dry, for mountain and road.
RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid
This suspension fluid is recommended by RockShox for shock rebuilds. - 15W 50 - 1L bottle
$5.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products
$5.00 - $24.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$9.99 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
Problem Solvers Frame Saver aerosol can with spout, 4.75oz. - Tried and true internal rust protection for steel frames - Protect your investment—each application lasts for years - One 4.75-ounch can treats 3 – 5 frames
$15.00 - $69.99
Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water soluble formula rinses easily leaving surfaces residue-free. - Heavy-Duty degreaser made from citrus extracts - Perfect for quickly dissolving and removing the toughest grease and grime - Low surface tension allows superior penetration for complete degreasing - Biodegradable, water-soluble formula easily rinses away
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
$7.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!
$9.99 - $62.99
Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.
- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.
$12.99 - $39.99
Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.
Page 1 of 2 Next page